北京华豫清源国际贸易有限公司

杜笙 Tulsion?A-23 均粒强碱型阴离子树脂 强碱型 , 均粒阴离子交换树脂 适用于超纯水系统的混床用离子交换树脂 STRONG base, MEDIUM EXCHANGE CAPACITY MonOSPHERE TYPE-I ANION EXCHANGE RESIN TULSION® A 23 UPS 强碱型离子交换树脂 ,是一款苯乙稀系列具有四级氨的高品貭 Type-1阴性离子交换树脂。并同时拥有**的物理及化学穏定品貭。可应用于汽电共生发电厂冷凝水处理及超纯水系统中的混床, 去除水中的阴性离子 。 TULSION® A 23 UPS其均匀的颗粒直径, 能取代传统的离子交换树脂而得到更好的处理水貭及减少压力损, 可以和Tulsion® T-42 UPS 一起搭配使用于2B3T及超纯水系统的混床 。 TYPICAL CHARACTERISTICS – 基本特性 型式(Type):Strong base Anion Exchange Resin 主体結構(Matrix structure):Polystyrene Copolymer 功能基(Functional group):Quaternary ammonium Type-I 離子型式(Ionic form):Chloride 均匀系数(Uniformity coefficient):Max. 1.25 平均粒径(Harmonic Mean size)580 + 50 um. 全交换容量(Total Exchange Capacity):1.30 meq/ ml 含水份(Moisture content (approx.)):40- 48 % pH范围(pH range):0 to 14 溶解率(Solubility):Insoluble in all common solvents. 允许温度(Maximum temp. stability):60°C (140ºF) 微粒含量(Fines Content):Less than 0.5% through 50 U.S. mesh 密度(Backwash settled density):42 to 44 lbs/ft3 (670-710 g/l) Shipping Weight:730 g / Lit (Approx.) OPERATION ConDITIONS – 操作条件 操作温度 (Operation Temp.) max C:60 树脂床高度 (Resin Bed Depth) mm:800 采水流量 (Service Flow Rate) maxi:60 m3/hr/m3 逆洗流量(Backwash Flow Rate):5 to 10 m3/hr/m3 逆洗空间(Backwash Expansion):50 to 70 % 再生药剂 (Regenerant):NaOH 再生药剂用量(Regeneration levels):40 to 160 gms NaOH / Liter 再生药剂加药时间(Regeneration contact min.):30 – 60 mins 再生流量 (Regeneration flow rate):5 to 10 m3/hr/m3 再生慢洗 (Regeneration slow rinse):2 BV mini. 快洗 (Fast Rinse):采水流量Service Flow Rage 快洗 水量 (Fast Rinse Volume):4 to 6 BV 杜笙Tulsion? T-42 UPS --------------均粒强酸形阳树脂 , 氢 H+ / 钠 Na+ 均粒强酸性阳离子适用于超 纯水的可再生混床系统 MonOSPHERE STRONG CATIonIC ION EXCHANGE RESIN FOR REGENERABLE MB 杜笙Tulsion® T-42 UPS 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。 杜笙 Tulsion? T-42 UPS 其均勻的颗粒直径, 能取代传统的離子交换樹脂, 並可以减少壓 力损, 可以和 杜笙Tulsion® A-23 UPS 一起搭配使用於2B3T及超纯水可再生的混床。 TYPICAL CHARACTERISTICS – 基本特性 型式(Type):Strong acid Cation exchange resin 主体結構(Matrix structure):Cross linked polystyrene 功能基(Functional group):Sulphonic 物理形式(Physical form):Moist spherical beads. 離子型式(Ionic form):Hydrogen (H+) 粒径Particle size ( 英國Mesh):Particle less than 0.3mm max. 1% 均勻係数(Uniformity Coefficient)：1.25 Min 平均粒径(Mean bead Size (mm))：0.58 ( +/- 0.05) 全交换容量(Total Exchange Capacity):1.80 meq/ ml (min.) in H+ form 含水份(Moisture content (approx.)):Approximately 53% in H+form pH范围(pH range):0 to 14 膨脹係数(Swelling (approximately)):-7% from Na+ to H+ form. 密度(Backwash settled density):800-840 g/l in H+ form；830-870 g/l in Na+ form 允许温度(Maximum temp. stability):120°C in H+ form；140°C in Na+form 溶解率(Solubility):Insoluble in all common solvents. OPERATION ConDITIONS – 操 作 条 件 -大操作溫度(Operating temperature , max 0 C):120 操作pH范围(Operating pH range ):0 – 14 -小樹脂床高度(Bed depth , mini mm):800 -大(Service flow rate ,Maxi ):120 m3/hr/ m3 逆洗水量(Backwash flow rate):9 to 25 m3/hr/ m3 逆洗浮動空間(Back wash expansion):40 to 75% 再生藥剤(Regenerant ):HCl, H2SO4 for H+ form, 再生藥剂用量(Regeneration levels. ):30 to 120 gms HCl/ lit.；40 to 250 gms H2SO4/ lit. 再生藥剂浓度(Regeneration concentration):3 - 5% HCl, 1.5 to 3% H2SO4 -少通再生藥剂时间(Regeneration Contact time, mini):-20 min. 再生流量(Regeneration flow rate ):5 to 16 m3/hr/ m3 Regeneration slow rinse:2 BV mini. 快洗用水(Fast Rinse ):Service flow rate. 快洗水量(Fast Rinse Volume):2 to 3 BV